The Uncorrectable Error for Windows Operating system Hardware Error Architecture (WHEA) is an on-blue screen Windows stop code. When your PC encounters this issue, it will usually compile several diagnostic data before restarting. If the fundamental cause of the problem is not addressed, your desktop will crash again, displaying the exact WHEA uncorrectable error notification.
Uncorrectable WHEA problems are typically caused by malfunctioning hardware, but they may have occurred due to driver incompatibilities, missing the latest updates from Microsoft, or maybe due to overclocking.
The WHEA Uncorrectable Error in Action
When this issue happens, you’ll likely see one of the following messages:
- Your PC has run into an issue and has to restart. You may look online for solutions to resolve this error. Else in case, you would like to know more, select: WHEA_UNCORRECTABLE_ERROR
- There was an issue detected, and Windows was powered off to prevent your desktop from damage. WHEA_UNCORRECTABLE_ERROR
Uncorrected WHEA Error Causes
- The WHEA error is defined as a blue screen crash stop code, usually because of several kinds of hardware failure. This problem is not correctable. The WHEA error results from a failing hard drive, defective memory, incorrectly installed CPU, and various other hardware problems.
- This error message can also be caused, apart from malfunctioning hardware, by driver tantrums and missing Microsoft updates that make hardware work unpredictably or not.
- Overclocking can, in several instances, also lead to this error due to additional strain overclocking on your CPU.
How to fix a mistaken WHEA
Since the failure of the hardware causes most WHEA errors, it usually requires the component to be tracked and replaced to fix that error. The best place to begin is on the end of software as it is easier and cheaper.
Usually, you will want to check for updates on Microsoft Windows and drivers, then verify for such components as your PC hard drive or the memory drive.
Follow the steps as per the instructions mentioned below and fi it up:
- To ensure that your system is up to date, use Windows Update. If automatic updates are not activated, or automated updates fail, you may lack a critical patch. Just type “Windows Update” inside your blank search bar for the taskbar to ensure you’re all up to date.
- You will have the option of installing them if you require any updates. You can also choose Update Check simply for certainty.
- Check your hardware physically. In one of your hardware components, you may have a physical fault or failure.
- You will need to check things, such as the hookup of your cooling system, secure RAM installation, and no loss of components like your CPU and secure connectivity.
- Check out the latest of your drivers. Controversy with drivers is one of the most common causes of WHEA error. It can be difficult to track the exact driver that has to be updated if you have a driver problem.
- To undo any recent changes on your computer, use System Restore.
- If you can’t figure out what changed to cause the system to throw WHEA uncorrectable errors, a system restore might help.
- It is a tool for you to restore your system to a previous state that effectively reverses any changes made in the meantime.
- Use the Error Checking software to look for problems with your hard disc. Because malfunctioning hardware might generate the WHEA uncorrectable error, using the Error Checking software can help you pinpoint the source of your problem. This programme is similar to the software “chkdsk” – in that it will notify you if your hard drive has any problems.
- Make use of a free memory test. Another hardware issue that might cause the WHEA uncorrectable error is faulty RAM/memory, which can be easily checked with a free memory diagnostic programme. If one of these programs indicates that you have a memory problem, changing your RAM may resolve your WHEA uncorrectable error.
- Unable BIOS or UEFI is overclocking. To quickly access your system BIOS or UEFI and undo any overclock modifications:
Enter-“Settings” on your taskbar landing site, then click to Update & Security > Recovery Tools> Advanced startup > Restart immediately.
- The restart is going to begin. Select Trouble Settings > Advanced settings > UEFI Settings Firmware. These choices will be somewhat different if your machine utilizes BIOS instead of UEFI.
- Your machine restarts and opens UEFI or BIOS automatically. Navigate to the overclock and deactivate the overclocking process.
- As a final resort, refresh Window frames. Reset Windows if everything else fails. It is an irreversible procedure that reinstalls Microsoft Windows from scratch and offers you a fresh start.
Voila! You are all done now; you should be able to surf on your desktop smoothly.
